1

100298

Snap Ring - Small (drive gear to housing washer)

1

--

2

100295

Snap Ring - Large (housing washer to drive housing)

1

--

• Kiwi snap rings are of an improved flat design so as to positively hold the mating parts in their respective locations. Original style snap rings were round in shape and easily became dislodged.

3

100297

Washer - Drive (tabbed)

1

--

4

100294

Washer - Housing (stepped)

1

--

5

100296

Gear - Drive (48 tooth)

1

--

*

100308

Gear - Drive (50 tooth)

1

--

6

416002

Fitting - Grease

1

--

7

100289

Speedometer Drive Unit (48 tooth drive gear - includes ref. 1-9)

1

--

• 48 tooth drive gear units suit motorcycles with 400 x 18 and 500 x 16 tires.

*

100307

Speedometer Drive Unit (50 tooth drive gear - includes ref. 1-9)

1

--

• 50 tooth drive gear units suit motorcycles with 450 x 18 tires.

8

100299

Pinion Gear & Shaft Assembly (mates with 48 tooth drive gear)

1

--

*

100309

Pinion Gear & Shaft Assembly (mates with 50 tooth drive gear)

1

--

• Both pinion gears have 15 teeth but differ in the distance from the end of the shaft to mate with the different drive gears.

9

100293

Housing - Pinion Gear

1

--

10

35L359X

Speedometer Cable (original 5/8" diameter, cloth covered)

1

32-34

*

35L359XR

Speedometer Cable (replacement 1/4" diameter)

1

32-34

*

100789

Speedometer Cable (original 5/8" diameter, cloth covered)

1

35-37

*

100789R

Speedometer Cable (replacement 1/4" diameter)

1

35-37

*

75262

Speedometer Cable (original 5/8" diameter, cloth covered)

1

38-39

*

75262R

Speedometer Cable (replacement 1/4" diameter)

1

38-39

*

75262S

Speedometer Cable (original 5/8" diameter, cloth covered)

1

40-42

*

277002

Speedometer Cable (replacement 1/4" diameter)

1

40-42

*

277002

Speedometer Cable

1

40-47

*

277002

Speedometer Cable

1

52-53

• Original cables through 1942 had a large 5/8 diameter cable and were cloth covered. Post 1942 Indians cables were reduced to 1/4" diameter (which also had a smooth operating inside flexi cable) and did not have any external covering. During Indians days of being in business, if your earlier model broke a cable, the factory replacement was the smaller 1/4" diameter cable. For this reason we also offer a replacement series cable just like Indian did back in the day.

*

40403

Clip - Speedometer Cable (long - at fuel tank mounting bolt)

1

38-42

• This clip fits the original style large 5/8" diameter speedometer cables. An adapter spacer will necessary when using Indians later style smaller diameter cable.

*

36B332

Clip - Speedometer Cable (to frame under seat)

1

38-47

11

239017G

Gear - Drive (31 tooth - mounts to front brake drum)

1

48-51

• Chief models use a 31 tooth drive gear while 741 models use a 32 tooth drive gear. Use the correct gear to obtain the correct speedometer reading.

12

605008

Nut - Jam 1/4-28

1

48-51

13

102746

Tab - Pinion Gear Locking

1

48-51

14

102805

Gear - Pinion (12 tooth)

1

48-51

• Chief models use a 12 tooth pinion gear while 741 models use a 13 tooth pinion gear. Use the correct gear to obtain the correct speedometer reading.

15

852122

Set Screw - Square Hd. 1/4-20 x 1/2"

1

48-51

16

388002

Speedometer Drive Unit (includes ref. 6, & 12-14)

1

48-51

*

388002G

Speedometer Drive Gear Set (inside drive unit)

1

48-51

17

277005

Speedometer Cable (for original Stewart Warner speedometers)

1

48

*

1277001

Speedometer Cable (for original Stewart Warner speedometers)

1

50-51

*

314016

Clip - Speedometer Cable (at left front fuel tank bolt)

1

48-51

*

36B332

Clip - Speedometer Cable (at front fender)

1

48-51